Home > Grade 8.8 Bolt
Grade 8.8 Bolt are suitable for construction applications requiring high tensile strength. Their tensile strength of 800 MPa provides the critical structural integrity required for load-bearing materials. These bolts are commonly used in heavy-duty applications such as construction and the automotive industry. However, it is advisable to check construction engineering standards and regulations to ensure that Grade 8.8 bolts are suitable for specific construction applications. This ensures safety and compliance with regulatory and industry standards.
| Washer Grade | Material and heat treatment | Chemical composition (analysis on the product) % | °C Min hardening temperature | ||||
| C | P | S | B | ||||
| minimum | max | max | max | max | |||
| 8.8 | Alloy/ Carbon steel (B, Mn, Cr), quenched and tempered | 0,15(3) | 0,40 | 0,025 | 0,025 | 0,003 | 425 |
| Quenched and tempered carbon steel washer | 0,25 | 0,55 | 0,025 | 0,025 | |||
| Quenched and tempered alloy steel washer | 0,20 | 0,55 | 0,025 | 0,025 | |||
| Grades | Size Range | PS [MPa] | YS (min) [MPa] | TS (min) [MPa] | Hardness [Rockwell] |
|---|---|---|---|---|---|
| Class 8.8 | Under M16 | 580 | 640 | 800 | |
| 17-72 | 600 | 660 | 830 | C23–34 |
At PipingMart, we take pride in being the largest supplier and manufacturer in the UAE, offering cutting-edge solutions for all your piping needs. With state-of-the-art production plants strategically located in the UAE, we boast a vast inventory of over 25,000 tons of premium-quality materials readily available in stock.
| Bolt Dia | Body Dia | Head Dia(F) | Head Height (H) | Degree of Slope | |||
|---|---|---|---|---|---|---|---|
| (D) | Max | Max Edge Sharp | Min Edge Sharp | Absolute Min Rounded | Max | Min | |
| 1/2 | 0.515 | 0.935 | 0.905 | 0.845 | 0.269 | 0.233 | 78° to 82° |
| 5/8 | 0.642 | 1.169 | 1.132 | 1.066 | 0.336 | 0.292 | 78° to 82° |
| 3/4 | 0.768 | 1.402 | 1.357 | 1.285 | 0.403 | 0.349 | 78° to 82° |
| 7/8 | 0.895 | 1.637 | 1.584 | 1.511 | 0.47 | 0.408 | 78° to 82° |
| 1 | 1.022 | 1.869 | 1.81 | 1.735 | 0.537 | 0.466 | 78° to 82° |
| 1-1/8 | 1.149 | 2.104 | 2.037 | 1.962 | 0.604 | 0.525 | 78° to 82° |
| 1-1/4 | 1.277 | 2.337 | 2.262 | 2.187 | 0.671 | 0.582 | 78° to 82° |
| 1-3/8 | 1.404 | 2.571 | 2.489 | 2.414 | 0.738 | 0.641 | 78° to 82° |
| 1-1/2 | 1.531 | 2.804 | 2.715 | 2.64 | 0.805 | 0.698 | 78° to 82° |
| Dimensions per ASME B18.5 1990 (R 1998) | |||||||
Contact us to get a quick quote for your requirement.
We offer These Grade 8.8 Bolt as per DIN, ISO, JIS or ANSI Standard.
| ASTM Standards | DIN ISO EN 4017 & 4014 DIN 933 / 931 & IS 1363 / 1363 |
| Size | Diameter 20 to 100 Milimeter / Inch 3/4 to 3.1/2 |
| Surface Finish | Zinc plated / Plain / Hot dip galvanised |
Grade 8.8 bolts applications are as diverse as the industries they serve driven primarily by the aerospace, railway, construction and automotive industries with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.
Yes, 8.8 grade bolts can attract magnets. These bolts are usually made of medium carbon steel, which contains iron, a ferromagnetic material. Iron bars pull grade 8.8 bolts to magnets. However, the specific magnetic properties may vary depending on the specific alloy and the temperature of each process used. For most practical purposes, you can expect Category 8.8 bolts to exhibit magnetic attraction, making them suitable for applications with important magnetic properties.
Call Us: +91 7208967217
Email: sales@pipingmart.ae
