| Standard | ASTM B166, B446, B425/ASME SB166, SB446, SB425 |
|---|---|
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round bar Size | Diameter: 3-~800mm |
| Hex Bar Size | 2-100mm A/F |
| Square Bar Size | 4 to 100mm |
| Angle Bar Size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Threaded Bar Billet Size | 1/2 to 495mm Diameter |
| Rectangular Size | 33 x 30mm to 295 x 1066mm |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Condition | Hardened & tempered, annealed |
| Technique | Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Processing | Bar cutting to 650mm |
| Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Inconel 600 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
| Inconel 718 | 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 135,000 , MPa – 930 | Psi – 70,000 , MPa – 482 | 45 % |
| Inconel 600 | 72.0 min | 14.0 – 17.0 | 6.0 – 10.0 | 0.15 max | 1.0 max | 0.015 max | 0.5 max | 0.5 max | 0.5 max |
| Grade | Ni | Cr | Cu | C | Mn | S | Mo | Si | Co |
| Inconel 718 | 50 – 55 | 17 – 21 | 0.3 max | 0.08 max | 0.35 max | 0.015 max | 2.8 – 3.3 | 0.35 max | 1.0 max |
At PipingMart, we take pride in being the largest supplier and manufacturer in the UAE, offering cutting-edge solutions for all your piping needs. With state-of-the-art production plants strategically located in the UAE, we boast a vast inventory of over 25,000 tons of premium-quality materials readily available in stock.
Contact us to get a quick quote for your requirement.
We offer These Inconel Bars as per DIN, ISO, JIS or ANSI Standard.
Inconel Bars applications are as diverse as the industries they serve driven primarily by the aerospace, railway, construction and automotive industries with petrochemical, nuclear, medical, Oil & Gas, Chemical, Pharmaceutical, Food & Beverage, Nuclear, Thermal Power plants, Paper and Pulp, marine and mining, etc.
1.Aerospace products: Inconel bars are used in aerospace applications for building materials, engine parts and exhaust systems due to their high temperature and corrosion resistance
2.Gas Turbines: Used in gas turbine engines for turbine blades, combustion chambers, and other high-temperature components, where resistance to thermal cycling and oxidation is required
3.Chemical Properties: Inconel tape finds use in chemical plants for reactors, piping and heat exchangers, where it resists corrosion from acids, bases and other strong chemicals
4.Oil and Gas Extraction: Inconel pads are used in oil and gas extraction equipment, such as downhole equipment, valves and tubing, where they withstand hot weather and high temperatures
5.Power Generation: Used in power plants for steam turbine components, boiler tubes and heat exchangers, where high temperatures and corrosive conditions are withstood
6.MARINE APPLICATIONS: Inconel bars are used in marine environments for propeller shafts, marine pipelines, and marine exhaust systems, where they resist salt water and marine weather a it rots
7.Medical Devices: Inconel patches are used in medical devices and implants, such as surgical devices and implants, due to their biocompatibility, impermeability and sterilization processes
8.Electrical Components: Used in electrical components, such as connectors, springs and sensor housings, where non-magnetic materials and corrosion resistance are required
1. Material grade choice: Inconel pads are available in various grades, each designed for a specific application. Consider factors such as heat resistance, corrosion resistance, mechanical properties and construction to choose the grade that provides the best combination of materials for your application.
2.Heat Resistance: Consider the maximum temperature of your application and choose an Inconel grade with adequate heat resistance to ensure stability and mechanical strength under high temperatures.
3.Corrosion resistance: Tiles should be checked for corrosion resistance to acids, alkalis, seawater, or harsh chemicals. Choose an Inconel grade with adequate corrosion resistance to ensure durability and reliability.
4.Mechanical properties: Determine the mechanical requirements of your application, including tensile strength, yield strength, durability, and fatigue resistance. Select an Inconel grade with mechanical properties that match your application requirements for checking structural integrity and performance under load.
5.Manufacturing Assembly: Consider manufacturing processes such as machining, welding, forging, and heat treatment. Choose an Inconel grade that conforms to required manufacturing processes to ensure ease of manufacture and quality products.
6.Size and Dimensional Tolerances: Specify the required strips’ size, shape, and dimensional tolerances based on your application specifications and manufacturing requirements.
Yes, stainless Inconel bars can be welded. However, special considerations must be taken due to their unique properties, such as high corrosion resistance and temperature strength. Proper surface preparation, selection of suitable welding processes (e.g., TIG, MIG), filler materials (e.g., Inconel 625), and controlled heat input are essential. Post-weld heat treatment may also be necessary to alleviate residual stresses. Adhering to these practices ensures successful welds, maintaining the integrity and performance of stainless Inconel bars in various applications.
TIG (Tungsten Inert Gas) welding is commonly recommended for joining Inconel bars due to its precision, control, and ability to produce high-quality welds. Techniques such as Pulsed TIG welding and Gas Tungsten Arc Welding (GTAW) are also suitable. It’s crucial to use appropriate filler materials designed for Inconel, such as Inconel 625 or Inconel 718, and maintain controlled heat input to minimize the risk of cracking.
Call Us: +91 7208967217
Email: sales@pipingmart.ae
