Home >Nickel Alloy> Nickel Alloy Sheets and Plates
Nickel alloy Sheets and Plates are flat, thin pieces of material made from nickel-based alloys. These alloys typically contain a high proportion of nickel, along with other elements such as chromium, molybdenum, cobalt, and iron, among others, to enhance specific properties like corrosion resistance, high-temperature strength, and toughness.
| Nickel Alloy Sheets & Plates Specifications | ASTM B162 / ASME SB162, BS EN 10088-2, en 10028-7, IS 6911 |
|---|---|
| Nickel Alloy Sheets & Plates Dimension Standard | MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
| Nickel Alloy Sheets & Plates Size Range | Cold rolled ASME SB162 Grade 201 Nickel Alloy Sheet 0.5-6.4 mm Hot rolled ASME SB162 Grade 200 Nickel Alloy Sheet 3.0–10.0 mm |
| Nickel Alloy Sheets & Plates Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Nickel Alloy Sheets & Plates Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Nickel Alloy Sheets & Plates Thickness | 0.3 mm to 120 mm |
| International Standard of Nickel Alloy Sheets & Plates | ASTM A480 ASTM A959 ASME IID EN ISO 9445 EN ISO 18286 EN 10051 EN 10088-1 ISO 15510 |
| Tolerances (width / thickness) of Nickel Alloy Sheets & Plates | EN 10258/ DIN 59381) EN 10151 ASME SB162 200 Nickel Alloy Strips EN 10088 SA -240-400 Strips |
| Finish of Nickel Alloy Sheets & Plates | 2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
| Hardness | Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
| Form | Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
| Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
| Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
| Nickel Alloy Profiling | Plasma Plate Cutting Laser Plate Cutting Oxy-propane Flame Cutting |
| Element | Ni+Co | Cu | Si | Mn | C | Mg | S | P | Fe |
|---|---|---|---|---|---|---|---|---|---|
| Nickel | 99.99 | 0.015 | 0.03 | 0.002 | 0.01 | 0.01 | 0.001 | 0.001 | 0.04 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
At PipingMart, we take pride in being the largest supplier and manufacturer in the UAE, offering cutting-edge solutions for all your piping needs. With state-of-the-art production plants strategically located in the UAE, we boast a vast inventory of over 25,000 tons of premium-quality materials readily available in stock.
Contact us to get a quick quote for your requirement.
We offer These Nickel Alloy Sheets and Plates per DIN, ISO, JIS or ANSI Standard.
Corrosion Resistance: Nickel alloys are highly resistant to corrosion, making them suitable for use in harsh environments such as chemical processing plants, marine applications, and offshore oil and gas platforms.
High Temperature Strength: Nickel alloys maintain their mechanical properties at elevated temperatures, making them ideal for applications in high-temperature environments such as gas turbines, power generation, and aerospace.
Excellent Mechanical Properties: Nickel alloy Sheets and Plates exhibit excellent mechanical properties, including high tensile strength, toughness, and ductility, providing reliable performance in demanding applications.
Versatility: Nickel alloys can be tailored to meet specific application requirements by adjusting the composition of alloying elements, allowing for a wide range of properties and performance characteristics.
Resistance to Creep and Fatigue: Nickel alloys demonstrate resistance to creep and fatigue, allowing them to maintain their structural integrity and dimensional stability over prolonged periods of use.
Weldability and Fabricability: Nickel alloy Sheets and Plates are generally weldable and formable, allowing for ease of fabrication and assembly into complex shapes and structures.
Compatibility: Nickel alloys are compatible with a wide range of other materials, including metals, polymers, and ceramics, facilitating integration into multi-material systems and assemblies.
Longevity: Nickel alloy Sheets and Plates offer long-term durability and reliability, resulting in extended service life and reduced maintenance requirements for industrial equipment and components.
Nickel alloy Sheets and Plates find widespread industrial use across various sectors due to their exceptional properties. In aerospace, these sheets serve in components subjected to high temperatures and corrosive environments, like turbine blades and engine components. Chemical processing relies on their corrosion resistance for vessels, piping, and reactors handling corrosive substances. In the oil and gas sector, they’re integral to offshore platforms, pipelines, and equipment due to their durability against harsh environmental conditions
Aerospace: Nickel alloy Sheets and Plates are used in aerospace applications for manufacturing aircraft components such as turbine blades, engine parts, structural elements, and exhaust systems due to their high temperature strength, corrosion resistance, and lightweight properties.
Chemical Processing: These Sheets and Plates are employed in chemical processing industries for fabricating vessels, reactors, heat exchangers, and piping systems that handle corrosive chemicals and high temperatures, where their corrosion resistance is crucial.
Oil and Gas: In the oil and gas sector, nickel alloy Sheets and Plates are utilized for offshore platforms, pipelines, valves, and equipment exposed to corrosive environments, high pressures, and extreme temperatures, ensuring reliability and longevity in harsh conditions.
Power Generation: Nickel alloy Sheets and Plates are used in power generation plants for turbines, boilers, heat exchangers, and other components subjected to high temperatures, pressures, and corrosive gases, ensuring efficiency and reliability in power generation processes.
Marine Engineering: These Sheets and Plates find application in marine engineering for shipbuilding, seawater desalination plants, offshore platforms, and marine structures, where their corrosion resistance to seawater and harsh marine environments is essential.
Medical Equipment: Nickel alloy Sheets and Plates are used in medical equipment manufacturing for components requiring biocompatibility, corrosion resistance, and sterilization capabilities, such as surgical instruments, prosthetic devices, and implants.
Electronics: In electronics manufacturing, nickel alloy Sheets and Plates are employed for battery components, connectors, and electronic packaging due to their electrical conductivity, thermal stability, and corrosion resistance.
Automotive Industry: Nickel alloy Sheets and Plates find applications in the automotive industry for manufacturing exhaust systems, catalytic converters, fuel cells, and other components requiring high temperature strength, corrosion resistance, and durability.
Nuclear Industry: These Sheets and Plates are used in the nuclear industry for fabricating reactor components, fuel rods, and containment vessels due to their resistance to radiation, high temperatures, and corrosive environments.
Food Processing: Nickel alloy Sheets and Plates are utilized in food processing equipment for their corrosion resistance and hygiene properties, ensuring the integrity and safety of food processing operations.
Identify Application Requirements: Determine the operating conditions, including temperature, pressure, corrosion, and mechanical stress levels, to select Sheets and Plates that can withstand these conditions.
Alloy Composition: Nickel alloys come in various compositions, each offering specific properties. Select an alloy composition based on the desired characteristics such as corrosion resistance, high temperature strength, or magnetic properties.
Thickness and Size: Choose Sheets and Plates with the appropriate thickness and size to match your application requirements, considering factors such as load-bearing capacity, dimensional tolerances, and available space.
Surface Finish: Consider the surface finish required for your application, such as smooth, polished, or textured surfaces. The surface finish can affect factors like corrosion resistance, aesthetics, and ease of cleaning.
Certifications and Standards: Ensure that the Sheets and Plates meet relevant industry standards and certifications, such as ASTM, ASME, or AMS specifications, to guarantee quality, performance, and compatibility with other components.
Corrosion Resistance: Evaluate the corrosion resistance of the nickel alloy against the specific corrosive agents present in your application, such as acids, alkalis, seawater, or chemical vapors, to prevent corrosion-related failures.
Temperature Resistance: Verify the temperature resistance of the nickel alloy Sheets and Plates to ensure they can withstand the maximum operating temperature without degradation or loss of mechanical properties.
Mechanical Properties: Consider the mechanical properties of the nickel alloy, such as tensile strength, yield strength, and ductility, to ensure they meet the mechanical requirements of your application.
Fabrication and Weldability: Assess the fabricability and weldability of the nickel alloy Sheets and Plates to ensure they can be easily formed, machined, and welded into the desired shapes and structures without compromising performance.
Cost Considerations: Evaluate the cost of the nickel alloy Sheets and Plates, including material cost, fabrication, and installation costs, to determine the overall value and cost-effectiveness of the solution.
Yes, nickel alloy Sheets and Plates can be suitable for hygienic and sanitary applications due to their corrosion resistance, smooth surface finish for easy cleaning, non-toxicity, resistance to bacterial growth, high temperature resistance for sterilization, long-term durability, and compliance with industry standards.
Nickel alloy sheets/plates can be fabricated and machined using conventional methods such as cutting, bending, forming, welding, and machining. Carbide tooling is recommended for machining operations, and proper precautions should be taken to avoid work hardening and tool wear.
Common grades of nickel alloy used for sheets/plates include Inconel, Monel, Hastelloy, Alloy 20, Nickel 200, Nickel 201, and others, each offering specific properties and performance characteristics for different applications.
To ensure quality and reliability, it’s important to source nickel alloy sheets/plates from reputable manufacturers who adhere to strict quality control standards, certifications, and industry specifications. Material tests, inspections, and compliance with standards should be verified before use.
| Thickness | Width | Length | Surface Finish |
|---|---|---|---|
| 15~85 mm | 914, 1219, 1524 mm | 3048, 6069 mm 10 M | Black |
| 3~8 mm | 20~1524 mm | Container Loading: Max. 10M Bulk: as request | No.1 |
| 8 up ~ 60 mm | 30~1524 mm | Max. 6096 mm | No.1 |
Call Us: +91 7208967217
Email: sales@pipingmart.ae
